Chemical Analysis
Metal alloy composition analysis helps enterprises to identify the element information or grades of metal materials, ensure that raw materials meet the composition requirements, assist enterprises to control material quality and reduce product quality problems. In addition, with the continuous innovation and improvement, some new composites emerge as the times require, and their composition analysis can not only fully understand their characteristics, but also lay the foundation for the development of more new materials. As a professional reliability third-party testing organization, T,C&A Lab can perform chemistry analysis for metal materials according to ISO, ASTM and other standards. Welcome to contact our experts for consultation.
Product range of metal composition analysis:
Ferrous metals: including alloy steel, carbon steel, cast iron, wrought iron, etc.
Non-ferrous metals: including aluminum, copper, lead, zinc and tin, as well as precious metals, etc.
T,C&A Lab's composition analysis services:
| Conventional element analysis | Cu, Zn, Pb, Sn, Fe, Al, V, Ti, Mn, Cr, Ni, Mo, Co, Ba, Mg, Li, K, Na, Ca, Cd, As, Hg, etc. |
| Gas element analysis | C, S, O, N, H |
| Rare element analysis | Sb, Bi, Be, Cs, Sr, Nb, Zr, Hf, Ga, In, Tl, Ge, Se, Te, Re |
| Rare-earth element analysis | La, Ce, Pr, Nd, Pm, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu, Y, Sc |
| Precious metal element analysis | Au, Ag, Pd, Pt, Rh, Ir, Ru, Os |
Our laboratory uses following methods for chemical analysis of metals:
Optical Emission Spectroscopy (OES)
Energy Dispersive X-Ray Spectroscopy (EDS)
Atomic Absorption Spectroscopy (AAS)
Graphite Furnace Atomic Absorption Spectroscopy (GFAAS)
Laser Induced Plasma Spectroscopy (LIPS)
Gas Chromatography Mass Spectroscopy (GC/MS)
Inductively Coupled Plasma (ICP)
Inductively Coupled Plasma Mass Spectrometry (ICP-MS)
Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
Combustion (LECO) Analysis
Positive Material Identification (PMI)
Standards we test to
| ASTM E1019 | Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Inert Gas Fusion Techniques |
| ASTM E3061 | Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance Based Method) |
| ASTM E415 | Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry |
| ASTM E1085 | Standard Test Method for Analysis of Low-Alloy Steels by Wavelength Dispersive X-Ray Fluorescence Spectrometry |
| ASTM E1621 | Standard Guide for Elemental Analysis by Wavelength Dispersive X-Ray Fluorescence Spectrometry |
In addition, the experts in our Chemical Analysis Laboratory also provide a variety of custom services as your needs and requirements. Let's discuss the custom service with our experts for free.
Instruments and data
References
- Herman, I. P. Optical Emission Spectroscopy[J]. Optical Diagnostics for Thin Film Processing, 1996:157-213.
- Bedair, T. M.; et al. Sustained drug release using cobalt oxide nanowires for the preparation of polymer-free drug-eluting stents[J]. Journal of Biomaterials Applications, 2018, 33(3):352-362.
- Palumbo, A. V.; et al. Application of Emerging Tools and Techniques for Measuring Carbon and Microbial Communities in Reclaimed Mine Soils[J]. Environmental Management, 2004, 33(1):S518-S527.
T,C&A Lab's services include, but are not limited to
Note: this service is for Research Use Only and Not intended for clinical use.
Related testing services
Ingredient Analysis
Structure Identification
Morphology & Size
Material Properties
Corrosion Testing
Mechanical Testing
Composite Testing
Non-Destructive Testing
Material Characterization
Performance Testing
Polymer Material Analysis
Pharmaceutical Analysis
Metallurgical Analysis
Restricted Substances Testing
Reverse Engineering Service
Industrial Diagnosis
Adhesive Testing
Coatings Testing
Graphene Testing
Ink Testing and Analysis
Leather Testing
Nonwoven Materials Testing
Pulp and Paper Testing
Plastic Testing
Resins Testing
Rubber Testing
Surfactant Testing and Analysis
Textile Testing
Metal and Alloys Testing
Ceramics Testing
Glass Testing
Liquid Crystal Testing
Composite Materials Testing
Nanomaterials Characterization
Rock Testing
Wood Testing
Menu
-
Material Testing
-
Ingredient Analysis
- Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES)
- X-Ray Fluorescence (XRF) Testing
- X-Ray Photoelectron Spectroscopy (XPS) Testing
- Infrared Spectroscopy Testing
- Ultraviolet Spectrum (UV) Testing
- Mass Spectrometry Testing
- Micro-Raman Spectroscopy Testing
- Nuclear Magnetic Resonance Spectroscopy Testing
- Elemental Analysis
- Structural Characterization
- Morphology & Size Analysis
-
Corrosion Testing
- Corrosion Inhibitor Testing
- Crevice Corrosion Testing
- Electrochemical Corrosion Testing
- Galvanic Corrosion Testing
- High Pressure High Temperature (HPHT) Corrosion Testing
- Hydrogen Embrittlement Testing
- Intergranular Corrosion (IGC) Testing
- Pitting Corrosion Testing
- Salt Spray Testing
- Sour Service Corrosion Testing
- Stress Corrosion Cracking (SCC) Testing
- Sulfide Stress Cracking (SSC) Testing
- Thermal Analysis
- Mechanical Testing
- Non-Destructive Testing
- Performance Testing
- Pharmaceutical Testing
-
Metallurgical Analysis
- Chemical Analysis
- Case Depth Testing and Analysis
- Grain Size Analysis
- Particle Size Distribution Analysis and Testing
- Coating Thickness Testing
- Inclusion Rating
- Ferrite Testing
- Porosity Testing
- Grain Flow Testing and Analysis
- Weld Testing
- X-Ray Diffraction (XRD) Analysis
- Scanning Electron Microscopy (SEM) Laboratory
- Harmful Substances Testing
- Reverse Engineering & Deformulation
- Karl Fischer (KF) Moisture Testing
- Industrial Problem Diagnosis
-
Ingredient Analysis
